The solution of oil press machine is slow feeding and can’t press oil
The reason and solution for the oil press machine not feeding: It is cause by the raw material is not wet or too dry, the seed is not full, moisture and the impurities are excessive. The oil must be re-selected and the oil moisture is high. At the beginning of the opening, the temperature of the pressing is low, the cake is too thin or too thick, and the parts are worn out and so on, which will cause no oil or low oil yield. The raw material is too wet or too dry to regulate the moisture of the oil. The oil is damp and mildewed, the grain is not full, and there are too many impurities in it. The moldy and deteriorating raw material should not be squeezed. Even if it can be squeezed out, it is harmful to human health after eating. The oil line is blocked, the squeeze is removed, and the squeezed strip is cleaned. Unblock the oil line that is blocked. the strip is not properly installed. It will can’t press oil when it is too tight. It will leak easily when it is too loose. When the thickness of the cake is less than 1.5mm and the oil with high oil content or high viscosity is pressed. The ribs should be removed and the strips reassembled. Increase the gap to solve the oil drain problem.
Oil press machine does not produce oil principle and method: oil press machine press oil is not smooth: the oil seam of the oil press machine is blocked by oil residue, broken ends or squeezed. We should remove the oil residue and check if the squeeze is too tight. If the squeeze is too tight, it should be adjusted.
The oil press machine is out of cake and the slag is too much, resulting in low oil yield: the oil residue should be cleaned in time and the squeezed strip should be refilled. If it is a human hopper, it should stop cutting in time, use the cake to slowly rush out the oil and carry out the subsequent pressing work. At the beginning of the opening, the temperature of the pressing is low, the cake is too thin or too thick, and the parts are worn out, etc., which will cause no oil or low oil yield.
More detail about oil press machine please contact us:
web : www.leyisi-machinery.com